When installing For Sports Venues, Rubber Membrane, it is crucial to ensure that it fits tightly with the ground or other structures. This is not only related to the use effect, but also directly affects the safety and durability of the sports venues. The following are some key steps and precautions to ensure that the rubber membrane fits tightly with the ground:
1. Ground preparation
Cleaning and inspection: First, thoroughly clean the paving area to ensure that the ground is clean, free of oil, dust, and debris. At the same time, check whether the ground is flat, and repair or level the uneven areas.
Humidity and temperature control: Ensure that the temperature and humidity of the construction environment meet the installation requirements of the rubber membrane to avoid installation problems caused by environmental factors.
2. Rubber membrane processing
Pre-cutting and numbering: Pre-cut the rubber membrane according to the actual size of the paving area, and number it after cutting so that it can be accurately docked during installation.
Interface processing: For the interface part of the rubber membrane, special processing is required, such as bonding with special glue or sealant to ensure the sealing and firmness of the interface.
3. Installation process
Positioning and fixing: During the installation process, first use a positioning tool (such as a laser line projector) to determine the installation position of the rubber membrane, and use nails or clamps to initially fix the rubber membrane to the ground.
Adjustment and alignment: During the fixing process, constantly adjust the position of the rubber membrane to ensure that it fits tightly with the ground or other structures without gaps or wrinkles.
Compacting and exhausting: Use a special compacting tool (such as a rubber roller) to compact the rubber membrane to exhaust the air and bubbles under the membrane, further ensuring its tight fit with the ground.
4. Detail processing
Edge processing: For the corners of the rubber membrane, special attention should be paid to its fit. If necessary, additional glue or sealant can be used for reinforcement.
Joint processing: For the joints of the rubber membrane, professional processing is required according to the guidance provided by the manufacturer to ensure the flatness and firmness of the joints.
5. Quality inspection
Overall inspection: After the installation is completed, the entire paving area is inspected to ensure that the rubber membrane fits tightly with the ground without gaps, wrinkles, bubbles, etc.
Functional test: Perform functional tests such as walking test and jumping test to verify the installation effect and performance of the rubber membrane.
Through the above steps and precautions, it can ensure that the For Sports Venues, Rubber Membrane fits tightly with the ground or other structures, improving the use effect and safety of sports venues. At the same time, it is also necessary to strictly abide by relevant specifications and standards during the construction process to ensure construction quality and safety.
